Arboleas Community Forum

Arboleas and Surrounding areas Message Board Sponsored by SPANISH PROPERTY CHOICE => Where can I find or buy - SPONSORED BY SPANISH PROPERTY CHOICE => Topic started by: palaces on June 11, 2013, 10:41:00 AM

Title: Sharpening chain saw blades
Post by: palaces on June 11, 2013, 10:41:00 AM
Can anyone tell me where I can have chain saw blades sharpened?
Title: Re: Sharpening chain saw blades
Post by: olly on June 11, 2013, 11:03:22 AM
Theres quite a few do it, just type "chainsaw sharpening" in the search section.
Title: Re: Sharpening chain saw blades
Post by: G and T on June 11, 2013, 11:10:57 AM
Longos did mine for me while I waited but have also used Ferreteria Lepanto and Ramblizos in Antas.

Richard.
Title: Re: Sharpening chain saw blades
Post by: mikeypen on June 11, 2013, 11:12:47 AM
Worth bearing in mind , if the chain is fairly old and not in good condition , it's probably better to fit a new one , Piman's have loads in and they fit them free of charge as well , the chain I had fitted was only 12 Euro's , imagine going into B & Q and asking them to do the same  :lol:
Mike.
Title: Re: Sharpening chain saw blades
Post by: CT on June 11, 2013, 11:38:47 AM
Longos - go to the upstairs office, the ladies there speak English and are always very helpful.
Title: Re: Sharpening chain saw blades
Post by: srljol on June 11, 2013, 11:53:15 AM


  Longos did mine, medium size €3.
Title: Re: Sharpening chain saw blades
Post by: PuffTheMagicDragon on June 11, 2013, 14:46:48 PM
Yes, €3 seems to be the standard price for sharpening a chain.
I always have my chain sharpened, at my local ferreteria, at the beginning of the log cutting season, then I give it a quick sharpen with a file every time I use it, to keep it sharp.
Always make sure that oil is being fed onto the chain whilst in use, and keep it well adjusted, and your chain should last for ages, but as Mikeypen says, if it's in poor condition, get a new one.

Puff
Title: Re: Sharpening chain saw blades
Post by: cantabrian on June 11, 2013, 19:00:02 PM
ALL this waffle about a chain sharpening exercise !! Just go and buy a FILE (s) IF one is in the campo how is one going to sharpen IT ??!! I suppose the majority of posters are townies so would have a problem sharpening a chain,BUT have a go ,get the right file size ,AND ?????????????
Title: Re: Sharpening chain saw blades
Post by: lizziedrip on June 13, 2013, 13:23:13 PM
New sharpening man on los llanos market by gate other end from spanish bar does all gardening tools knives woodwork tools etc
Title: Re: Sharpening chain saw blades
Post by: jimbothescot on June 16, 2013, 07:05:55 AM
When I worked on the farm in Scotland we had to go on a 2 day chain saw course to get the certificate to be allowed to use it. For the first two hours of the course all we were allowed to do was sharpen the chain. The other thing to watch is the space in the bar that the chain runs in will eventually spread and wear down on the underside. When that gets worn it`s time to invest in a new bar because that`s when it`s in danger of throwing the chain off and you could be badly cut.

Jimbo :tiphat: